An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed). That's it! The sensor is rugged, and easy to mount. The cable can easily disconnect with a few twists and has a weatherproof connector.
The Connector details are as follows: Pin 1 - Power (brown wire), Pin 2 - Ground (black wire), Pin 3 - Signal (blue wire), Pin 4 not connected
Wire Dimensions (A)Diameter (Thickness)
4.8mm / 0.2"
Wire Dimensions (B)Plug Length
30mm / 1.2"
Wire Dimensions (C) Wire Length
99cm / 39"
70mm / 2.8"
Center Out To Cup Dimension
102mm / 4"
Height (Base To Center)
105mm / 4.1"
Max Wind Speed
1 meter/s (worst case)
Start Wind Speed
0.5m/s to 50m/s
0.4V to 2V
* Product Images are shown for illustrative purposes only and may differ from actual product.
Check out all of our categories