Ardupilot APM 2.8 Flight Controller - Flight Controller - Drone - Xbotics View larger

Ardupilot APM 2.8 Flight Controller - Flight Controller - Drone - Xbotics

New product

APM 2.8 Multicopter Flight Controller is upgraded version of 2.5 2.6 with Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.

More details

20 Items

₹ 2,600.00 tax excl.

₹ 2,600.00 per 1

Add to wishlist

More info

The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

This revision of the board has an optional onboard compass, which is designed for vehicles (especially multi-copters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.8 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass so that the GPS/Compass unit can be mounted further from noise sources than APM itself.

APM 2.8 Multicopter Flight Controller requires a GPS unit for full autonomy. You can add additional extras to your AMP 2.8 board via the options above.

POWERFUL GROUND CONTROL SOFTWARE

The downloadable mission planner software is what you use to configure and control your Ardupilot board, features include:

  1.         Point-and-click waypoint entry, using Google Maps.
  2.         Select mission commands from drop-down menus.
  3.         Download mission logs files and analyzes them.
  4.         Configure APM settings for your airframe.
  5.         Interface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.
  6.         See the output from APM’s serial terminal.
  7.         Straight Needle
  8.         Arduino Compatible!
  9.         Onboard 4 MegaByte Dataflash chip for automatic data logging.
  10.         Optional off-board GPS, a uBlox LEA-6H module with Compass.
  11.         One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
  12.         Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.

Features :

  1.         Straight Needle
  2.         Arduino Compatible!
  3.         Onboard 4 MegaByte Dataflash chip for automatic data logging.
  4.         Optional off-board GPS, a uBlox LEA-6H module with Compass.
  5.         One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
  6.         Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
  7.         Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

SPECIFICATION

Model

APM 2.8

Power supply

LP2985-3.3.

Port

MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).

Input Voltage (V)

12~16 VDC

Sensors

3-Axis Gyrometer
Accelerometer
High-performance Barometer

Processor

ATMEGA2560 and ATMEGA32U-2

Micro-SD Card Slot

No

* Product Images are shown for illustrative purposes only and may differ from actual product.

Check out all of our categories

https://xbotics.in

http://xbotics.in/12-aerial-botics

http://xbotics.in/13-ground-botics

http://xbotics.in/15-iot

http://xbotics.in/16-3d-printing

http://xbotics.in/17-composites

http://xbotics.in/103-drone-parts

29 other products in the same category: