Delivery in 5 - 7 Days of Order
The A2 Flight Control System for Multi-Rotor Aircraft from DJI provides the autonomy that four, six, and eight rotor aircraft require for stable flight.
10 Item Items
Warning: Last items in stock!
The A2 breaks down into five main components: the MC (main controller) with CAN-Bus hub and receiver, IMU, GPS, PMU, and LED. The IMU, GPS, and PMU provides the MC with altitude, acceleration, location, orientation, and other data which gets combined with any pilot instructions and translated into motor response. The system supports Quad I, Quad X, Hex I, Hex V, Hex Y, Hex IY, Oct X, Oct I, and Oct V motor mixes. The included receiver is compatible with Futaba FASST series and DJI DESST series transmitters.
|Size||Controller: 54mm x 39mm x 14.9mm
PMU: 39.5mm x 27.6mm x 9.8mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-Compass Pro: 62mm (diameter) x 14.3mm
LED: 30mm x 30mm x 7.9mm
|Power Consumption||Max. 5W|
|Maximum Wing Resistance||<8m/s|
|Max Yaw Angular Velocity||150 deg/s|
|Max Tilt Angle||35°|
|SDK||Mobile SDK is supported A2+LB2 used|
|PWM I/O Ports||F1-F4 ports for output|
|iOSD Data Storage||Need iOSD MARK II|
|Ground Station||2.4G/900MHz DATA LINK|
|Intelligent Flight Modes||Home Lock, Course Lock, Point of Interest, Banked Turn|
|Remote Parameter Adjustment||A2 Assistant APP|
|PC Assistant||DJI ASSISTANT, not support simulator|
|Supported Multi-rotor||Quadcopter: I4，X4;
|Supported ESC||400Hz frequency|
|Recommended Battery||2S to 6S LiPo|
|Operating Temperature||-5°C to +60°C|
|Assistant Software System Requirement||Windows XP SP3 / 7 /8 (32 or 64 bit)|
|Recommended Radio||S-BUS, D-BUS, PPM, DSM2 or normal receiver|
|Other DJI Products Supported||Z15, H3-2D, H3-3D, iOSD, 2.4G Data Link, S800 EVO, S900, S1000, S100+, etc.|
|Motor Fail Protection||Minimum 6 axis|
|No Fly Zones||Supported|
|Low Battery Voltage Warning||Supported|
* Product Images are shown for illustrative purposes only and may differ from actual product.
Check out all of our categories