Arduino Due Board - Control Boards - Xbotics View larger

Arduino Due Board - Control Boards - Xbotics

New product

The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.

More details

10 Items

₹ 1,650.00 tax excl.

Add to wishlist

More info

The SAM3X has 512KB (2 blocks of 256KB) of flash memory for storing code. The bootloader is pre-burned in a factory from Atmel and is stored in a dedicated ROM memory. The available SRAM is 96KB in two contiguous banks of 64KB and 32KB. All the available memory (Flash, RAM, and ROM) can be accessed directly as a flat addressing space.

It is possible to erase the Flash memory of the SAM3X with the onboard erase button. This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered.

Due follows the 1.0 pinout:

TWI: SDA and SCL pins that are near to the AREF pin.
The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.
An unconnected pin, reserved for future use

Connections / Interfaces

Digital I / O pins54
With PWM12
USBYes
SPINo
I²CNo
ICSPYes
TWI2x
UART4x
CANYes
SAC2x
LANNo
BluetoothNo

Features :

  1. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
  2. CPU clock at 84Mhz
  3. 96KBytes of SRAM
  4. 512KBytes of flash memory for code
  5. A DMA controller, that can relieve the CPU from doing memory intensive tasks.

SPECIFICATION:

Analog I/O Pins

Input-12 /Output-2 (DAC)

Clock Speed

84 MHz

Color

Blue

DC Current per I/O Pin

130 mA, DC Current for 3.3V Pin: 800 mA, DC Current for 5V Pin: 800 mA

Digital I/O Pins

54 (of which 12 provide PWM output)

Flash Memory

512 KB all available for the user applications

Input Voltage(Recommended)

7-12V

Microcontroller

AT91SAM3X8E

Operating Voltage

3.3V

SRAM

96 KB (two banks: 64KB and 32KB)

Weight (gm)

35g

Dimensions (mm) LxWxH

104 x 53 x 15

* Product Images are shown for illustrative purposes only and may differ from actual product.

Check out all of our categories

https://xbotics.in

http://xbotics.in/12-aerial-botics

http://xbotics.in/13-ground-botics

http://xbotics.in/15-iot

http://xbotics.in/16-3d-printing

http://xbotics.in/17-composites

http://xbotics.in/103-drone-parts

21 other products in the same category: